:[KSModul!кModuleЁ\GУА мША ма@ Simple Scope╛Simple oscilloscope for displaying a time-varying signal. Note: This macro is monophonic. Only the signal of the last played voice is displayed. Made by Erik Wiegand at Native Instruments][KInPort            =Input for the signal to be displayed Typ. Range: [ -1 ... 1 ]][KSModul!кHh,@`=Input for the signal to be displayed Typ. Range: [ -1 ... 1 ]][KOutPort    ][KSModul!к├а°@``][KInPort        ][KInPort        ][KOutPort ][KSModul!к┐И рX``(][KInPort        ][KInPort        ][KOutPort ][KSModul!кv(рX``][KInPortd        ][KOutPort ][KSModul!к?А??р┬A№    ш╠фЇH`aК[[D`]К[[`YVThe amplitude of the signal fitting on the height of the screen. Scale: 1 dB per unit ][KOutPort][KSModul!кd??А @Б=╠╠═?А    шАР╝а8`(0.1][KOutPort ][KSModul!кd??А @Б?А?А    шАа╝░``(][KOutPort ][KSModul!кd??А @БA ?А    шА░╝└8`(10 ][KOutPort ][KSModul!к?А??Ё?АB╚    ш╠pА(`AК[[$`=К[[`XlThe duration of the signal fitting on the width of the screen. Scale: the unit set with the "Scale" switch. ][KOutPort ][KSModul!кo8РX└`` ][KInPort4        ][KInPort5        ][KOutPort ][KSModul!к?А?*кл?А @Б?А    ш╠М╘\&К0d&Т0` X Scale╒Scales the values of the "X"-knob. Scale: milliseconds per unit The resulting ranges of the "X"-knob are: scale= 0.1 -> 0.1 - 10 ms scale= 1 -> 1 - 100 ms scale= 10 -> 10 - 1000 ms ][KInPort            $0.1][KInPort            1][KInPort            $10][KOutPort     ][KSModul!к??А @БDz    ш╪└08АдYаUАдYаU@`ГOscilloscope for displaying a time-varying signal. Note: The scope is monophonic. Only the signal of the first voice is displayed. ][KInPortЛ        ][KInPortМ        ][KInPortН        ][KInPortО        ][KInPortП        ][KInPort        ][KSModul!кгXP``][KInPortU        ][KInPortV        ][KOutPort ][KSModul!к?А?А @Б?@?А    шШрtlФЕdpДЙ`Freeze1Freezes the current curve displayed on the scope.][KOutPort ][KSModul!кd??А @Б?А?А    hш<\xl``][KOutPort][KSModul!к,ИД└hhmmXT]Y8@ Last Voice][KOutPort    ][KSModul!к,<